Skip to content

Pro-ject Stereo Phono Box S Black

Cat no. 9120065182976

The Pro-Ject Stereo Box S Phono is a combination of the Stereo Amp Box S, Pre Box S and Phono MM, in one stylish body, offering exceptional sound quality. The new "S" body design makes the Stereo Box S Phono a slim and elegant looking device.

The amplifier can be controlled with a slim-line IR remote, or via the simple and minimal front-facing controls*.

The built in phono stage is capable of accommodating your moving magnet cartridge with ease so no matter what MM cartridge you have you're covered.


Key Features:

  • 2 x 37 watts @ 4 ohms
  • 2 ohm drive capability
  • Low noise pure analogue audio circuitry
  • Dual mono design principle
  • 3 stereo lines and phono input (RCA)
  • Motor drive potentiometer
  • IR remote included 
  • 2 different face-plate colours, black or silver

Technical Data:

Output Power:

2 x 25W @ 8Ω (Both Channels Driven)
2 x 37W @ 4Ω (Both Channels Driven)Frequency Response:20Hz - 20kHz (- 0.3dB, -2.5dB)Channel Separation: > 40dB at 20kHz Noise Floor: > -100dB (A weighted) THD: <0.05% at 10W Gain: 22dB Line-Level Inputs:2 Pair RCA/Phono Sockets, 3.5mm Co-Axial JackPhono Amplifier:Moving Magnet (MM)RIAA- EQ Curve Accuracy: 20Hz - 20kHz / Max. 0.5dB Input Impedance: 20kohms Speaker Connections: 4mm Banana Plugs, Spades Connectors or Naked Wire Power Supply:20V / 3A DCPower Consumption:3A DC, <1W In StandyDimensions (W x H x D):206 x 40 x 150mm (165mm W/Sockets)Weight:1250g (Without PSU)
*Please note, first generation Stereo Box S Phono (with toggle power switch, rather than push button) cannot be switched off via the remote control. They can only be turned on and off using the switch on the front panel.